Prim Rollator Premium Burgundy A500

PRODUCT DESCRIPTION

The Premium A500 Rollator Walker is a mobility device designed for people with walking assistance needs. Made of lightweight aluminum, it is suitable for both indoor and outdoor use thanks to its four large-diameter wheels and stable frame. The burgundy color provides an elegant finish, while the integrated seat and backrest allow for comfortable short breaks during use. Its foldable design makes it easy to store and transport in a vehicle or at home.

MAIN FEATURES

• Aluminum frame material, which provides lightness without sacrificing strength.
• Four 200 mm diameter wheels (front and rear) that offer good adaptability to the outdoor terrain.
• Adjustable height of the walker (approximately between 85 and 101 cm) which allows it to be adjusted to the user for an ergonomic gait.
• Total width of 66 cm, which provides stability when moving.
• Foldable for easy transport and storage when not in use.
• Parking brake: allows you to lock the walker to stop it from moving forward unintentionally.
• Maximum user capacity 100 kg. Approximate weight of the walker: 6.5 kg.

INSTRUCTIONS FOR USE

• Adjust the height of the frame so that when the user grips the handles, the arm is slightly bent (comfortable pushing angle).
• Before you start walking, check that the brake is released (not in parking mode) and that the wheels spin freely.
• Push the walker forward with both hands on the handles, moving forward with the front wheels first, then the rear wheels. Avoid pulling it backward uncontrollably.
• When you stop and want to use the seat, engage the parking brake to immobilize the walker, making sure it is locked before sitting down.
• After use, if it is necessary to move or store it, fold it according to the manufacturer's instructions to reduce its storage volume.

WARNINGS

• This walker does not make the user independent without supervision if there are severe balance, vision, or neuromotor control impairments. Professional evaluation is recommended.
• Do not exceed the maximum load specified by the manufacturer (100 kg), to avoid risks of structural failure.
• Periodically check that the brakes, wheels and handles are in good condition; replace any worn parts to maintain safety.
• Avoid using it on slippery surfaces, steep slopes, or unsupervised ramps; always maintain control over the device.
• Folding and transport must be done with caution, ensuring that no part is caught or damaged.
• Store in a dry, clean place. Do not use if there are bent parts, visible rust, or loose pieces.